電解電容型號眾多，即便是外觀相同的電解電容，其電壓和容量也可能不同，所使用的地方和用途也大大不同，山東紅寶電子一直堅持在出庫前會進行二次檢測，以保證電解電容的質量。電解電容檢測過程包括：

　　There are many types of electrolytic capacitors. Even if the electrolytic capacitors with the same appearance, their voltage and capacity may be different, and the places and uses used are also greatly different. Shandong Hongbao Electronics always insists on conducting secondary detection before leaving the warehouse to ensure the quality of electrolytic capacitors. The detection process of electrolytic capacitor includes:

　　1.QC檢測臺，要求電解電容出貨前必須檢測，達到以下標準才為合格品。測試電壓不低于額定電壓1.3倍，容量在±20%的范圍以內，未達到以上標準，不準發貨！如果不按要求檢測導致客戶貨物質量出現問題倉庫質檢人員自行承擔損失。

　　QC test bench, it is required that the electrolytic capacitor must be tested before delivery, and the qualified product can only meet the following standards. The test voltage shall not be less than 1.3 times of rated voltage, and the capacity shall be within ± 20%. If the test voltage fails to meet the above standards, shipment is not allowed! If the customer's goods are not inspected according to the requirements, the warehouse quality inspector shall bear the loss.

　　2.電容電壓檢測：入庫和出貨前的電壓檢測，嚴格把控在額定電壓的1.3倍以上。

　　Capacitance voltage detection: the voltage detection before storage and delivery should be strictly controlled at 1.3 times of the rated voltage.

　　3.電容容量檢測：入庫和出貨前的容量測試，嚴格把控在±20%數值內，不達標堅決不發貨。

　　Capacitance capacity test: the capacity test before storage and delivery shall be strictly controlled within ± 20%, and the products shall not be delivered if they are not up to standard.

　　4.倉庫入庫檢測：入庫前抽樣檢查和每月的庫存例行檢查，是金茂源的一道風景線，確保產品質量能達到客戶要求。

　　Warehouse warehousing inspection: sampling inspection before warehousing and monthly inventory routine inspection are a scenic spot of jinmaoyuan to ensure that the product quality can meet customer requirements.

　　電解電容是損耗性器材，再長時間的放置時，會導致放電漏電的情況，發貨前的嚴格檢測，不僅是對顧客的負責也對產品質量的保障。山東紅寶電子始終堅持以客戶利益為準繩，確保每一件出庫的電子元器件的品質達標，更好的服務于廣大的企業用戶。

　　Electrolytic capacitor is a kind of wear and tear equipment. If it is placed for a long time, it will lead to discharge and leakage. The strict inspection before delivery is not only responsible for the customers, but also the guarantee of product quality. Shandong Hongbao electronic always adheres to the interests of customers as the criterion to ensure that the quality of each electronic component out of the warehouse reaches the standard and better serves the majority of enterprise users.